Glass Shower Doors & Enclosures in Sussex & Kent County, DE | Atlantic Source
No interest if paid in full in 18 monthsFinancing now availableSee details
Call Free Consultation

Shower doors & enclosures in Sussex & Kent

Atlantic Source installs frameless, semi-frameless, and sliding glass shower doors and enclosures from Lewes and Rehoboth Beach to Milford and Dover. Every panel is measured and cut to your exact opening, with your choice of hardware finish and an easy-clean protective coating, and each one is priced during your free in-home consultation.

Frameless glass corner shower enclosure on a tiled knee wall, with chrome hinges and clips
20+Years, since 2005
2,500+Spaces transformed
4.8★on Google
CustomGlass cut to fit

Shower doors for every bathroom

A clear glass door is the fastest way to open up a bathroom and show off the tile you paid for. We handle the whole job: accurate field measurement, custom-cut tempered glass, precise hardware, and a clean, leak-conscious installation.

Frameless shower doors

Heavy 3/8" or 1/2" tempered glass with minimal hinges and clips, for a clean, architectural look that lets your tile and fixtures take center stage.

Semi-frameless shower doors

A slim metal frame on select edges keeps cost down and adds rigidity, while the door and main panels stay open and bright. A popular middle ground.

Sliding & tub doors

Bypass doors that glide past each other instead of swinging out, for tubs, wide openings, and bathrooms with no room for a door to swing. Swing doors and split panels too.

Walk-in shower panels

A fixed glass panel that keeps water in with no door to open or clean around, sized to your shower's footprint and where the shower head sprays.

Corner & custom enclosures

Neo-angle corners, returns, knee-wall panels, and steam-shower tops, with every piece cut to your exact opening, even where the walls aren't square.

Shower door replacement

Swap a dated framed door or tired, cloudy glass for new custom-cut glass and hardware, fitted to the opening you already have.

Floor-to-ceiling frameless glass walk-in shower with a tiled bench and linear drain

Glass and hardware built for the coast

Salt air near the beach and mineral-heavy water inland are both tough on shower glass and metal. We specify tempered glass, corrosion-resistant hardware, and a protective coating that keep a door looking new far longer than a big-box kit.

  • Tempered safety glass in 3/8" and 1/2" thicknesses, with polished edges
  • Hinges, handles, and clips in chrome, brushed nickel, matte black, brushed gold, or oil-rubbed bronze
  • An optional easy-clean coating that resists hard-water spots and soap scum
  • Precise field measurement, so every panel seats true with minimal leaks

From first measure to final reveal

Step 01

Consult

A free in-home visit to look at your opening, talk through door styles and glass, and choose a hardware finish.

Step 02

Measure

We field-measure once your tile is set, so every panel is cut to the opening you actually have.

Step 03

Fabricate

Your tempered glass is cut, polished, and coated to spec, and hardware is ordered in your finish.

Step 04

Install

A clean, careful installation, usually in a few hours, leaving you a sealed, true-seated door.

Rated 4.8 on Google

★★★★★
"Mike from Atlantic Source and his crew did an excellent job installing my bedroom closets. They were professional, punctual, and clearly knew what they were doing… everything turned out exactly as I hoped."
— Chris C.
★★★★★
"I recently used Atlantic Source to transform two walk-in closets and a linen closet… everything worked seamlessly. Mike and his crew arrived timely and cleaned all work areas. I am thrilled with the end results."
— Gayle M.

Shower door & enclosure FAQ

How much do glass shower doors and enclosures cost?

It depends on the glass thickness, the size and shape of your opening, the hardware finish, and whether you add an easy-clean coating. A semi-frameless door costs far less than a large frameless walk-in with custom angles. Rather than quote a misleading flat number, we measure your actual bathroom and give you a fixed price during your free in-home consultation, so the number you see is the number you pay.

What's the difference between frameless, semi-frameless, and framed shower doors?

A framed door surrounds the glass in metal on every edge. It's economical and rigid, but the metal collects water and shows more. A frameless door uses thicker tempered glass held by minimal hinges and clips, for a clean, open look that makes the bathroom feel larger and is easier to wipe down. Semi-frameless sits in between: a slim frame on select edges for added strength at a lower cost. We'll help you weigh look, budget, and maintenance.

How thick is the glass, and what is the easy-clean coating?

Frameless doors and enclosures typically use 3/8-inch or 1/2-inch tempered safety glass, while semi-frameless and framed units use thinner tempered glass supported by their frame. All of it is heat-treated to shatter into small, blunt pieces if it ever breaks. The optional easy-clean coating is a clear, factory-applied sealer that fills the microscopic pores in the glass so hard-water minerals and soap scum can't grab on, and a quick wipe keeps it clear.

Can you replace an old shower door without redoing the tile?

Usually, yes. A new door or enclosure is fitted to the opening you already have, so the tile can stay. At your consultation we check that the walls and curb are sound and measure for the new glass, and if anything needs attention first, we tell you before you commit.

Do you install sliding glass doors on bathtubs?

Yes. A sliding bypass door is the most common choice for a tub, since the panels glide past each other instead of swinging into the room. We also fit swing doors and split panels where they suit the layout, all cut to your tub deck and walls.

How long does it take to get a shower door installed?

Because every piece is cut to your exact opening, the glass is ordered after we measure. Most projects run about two to three weeks from measurement to installation, depending on the glass shop's lead time and your hardware finish, and the installation itself usually takes a few hours. We measure once your tile is fully set so the fit is exact.

Is there a warranty on your shower doors?

Yes. The tempered glass and hardware carry the manufacturer's warranty, and our workmanship is backed by Atlantic Source, a local Delaware company in business since 2005. If anything needs attention, you're calling a team you can reach, not an out-of-state distributor. We'll walk you through the coverage on your specific glass and hardware before you commit.

Where do you install shower doors and enclosures?

Across Sussex & Kent County: Lewes, Rehoboth Beach, Milton, Georgetown, and Millsboro; the Quiet Resorts from Bethany Beach and Ocean View to Fenwick Island; and inland to Milford, Harrington, Dover, and Smyrna. There's no extra travel charge.

Atlantic Source installs glass shower doors and enclosures across Sussex & Kent County, from the beach towns to Milford, Dover, and Smyrna. Doing more than the bath? The same team builds custom closets, pantries, and garage systems, and coats floors in epoxy, so the whole home can be finished by one company.

Powered by Coastal Bay Digital